Welcome to the Canadianbasswood.com
website!
This is where you can buy quality Basswood blanks and
have them shipped straight to your door from Canada.
Ogilvie's Planing Mill Limited has been operating Hoffmeyer's
Mill in Sebringville, Ontario since 1974 and offers quality select
and better kiln dried hardwoods including Basswood, Butternet,
Ash, Oak, Maple, Cherry, Walnut, Teak, Mahogany plus quality sofwoods
such as Pine, Douglas Fir and Red Cedar. We cater to many types
of woodworkers including wood carvers and entarsia enthusiasts.
We use the materials we stock in our own millwork operation so
we look through all the sources and buy only from the best!
We can sell by the foot or lots of 1000BF or more. We will
cut 2 feet off an end of a board and keep the balance as long
as it is 6 feet or more. For a small fee we can take digital images
of the board we would be cutting for you so you can see the exact
piece of material you are buying.
Basswood is stocked in 1", 2" and 4"
thickness and comes 4" to sometimes as wide as 15"!
Above is a a new load whihc arrived in March, 2005
and is dry and ready to go. We can dress four sides or leave it
in the rough, whatever works best for you. We can also cut away
some material on the bandsaw if it will help get you to where
you want to be.
Some blanks cut out and dressed 4 sides from the 4"
rough sawn lumber
Another shot of the batch. Some boards are 12"+
wide and are 16 feet in length.
Above is some of the nicest Cherry we have ever had
in. This material is red two faces with next to zero sapwood.
We also have a small amount of 1" Butternut available.
EMAIL
or order toll free USA/Canada 1 877 644 5843
Direct mail inquiries to :
Canadian Basswood
c/o Ogilvie's Planing Mill ltd
189 Huron Road, HWY 8 West
Sebringville, Ontario, Canada
N0K-1X0
We will be adding more pictures and information as
we go.
www.hoffmeyersmill.on.ca
last updated 04/04/2006